Emerson Rosemount 2051 Reference Manual page 36

Configuration
September 2020
4. Carefully read the warning and click Yes if it is safe to apply the changes.
2.11.2 Communicating with a multidropped transmitter
To communicate with a multidrop transmitter, the Field Communicator or AMS Device
Manager has to be set up for Polling.
Communicating with a multidropped transmitter using a
Field Communicator
Procedure
1. Select Utility and Configure HART Application.
2. Select Polling Addresses.
3. Enter 0–63.
Communicating with a multidropped transmitter using AMS
Device Manager
Procedure
Select on the HART
36
a) Select Manual Setup, select the HART tab and select the Change Polling
Address button.
® modem icon and select Scan All Devices.
Reference Manual
00809-0100-4107
Rosemount 2051 Pressure Transmitter