Loi/Lcd Display - Emerson Rosemount 2051 Reference Manual

Electrical Installation
September 2020
WARNING
Improper assembly of manifolds
Improper assembly of manifolds to traditional flange can damage the SuperModule
Platform.
For safe assembly of manifold to traditional flange, bolts must break black plane of flange
web (i.e., bolt hole) but must not contact module housing.
Physical access
Unauthorized personnel may potentially cause significant damage to and/or
misconfiguration of end users' equipment. This could be intentional or unintentional and
needs to be protected against.
Physical security is an important part of any security program and fundamental to
protecting your system. Restrict physical access by unauthorized personnel to protect end
users' assets. This is true for all systems used within the facility.
4.3

LOI/LCD display

Transmitters ordered with the LCD display option (M5) or LOI option (M4) are shipped with
the display installed. Installing the display on an existing transmitter requires a small
instrument screwdriver. Carefully align the desired display connector with the electronics
board connector. If connectors don't align, the display and electronics board are not
compatible.
Figure 4-1: LCD Display
A. Jumpers (top and bottom)
B. LCD display
C. Extended cover
66
Reference Manual
00809-0100-4107
A
B
C
Rosemount 2051 Pressure Transmitter
™