Verify Configuration - Emerson Rosemount 2051 Reference Manual

Configuration
September 2020
Figure 2-4: LOI Configuration Buttons
A. Internal configuration buttons B. External configuration buttons
Table 2-2: LOI Button Operation
Button
Left
Right
2.4.3 Setting the loop to manual
Whenever sending or requesting data that would disrupt the loop or change the output of
the transmitter, set the process application loop to manual control. The Field
Communicator, AMS Device Manager, or the LOI will prompt you to set the loop to manual
when necessary. The prompt is only a reminder; acknowledging this prompt does not set
the loop to manual. It is necessary to set the loop to manual control as a separate
operation.
2.5

Verify configuration

It is recommended that various configuration parameters are verified prior to installation
into the process. The various parameters are detailed out for each configuration tool.
Depending on what configuration tool(s) are available follow the steps listed relevant to
each tool.
16
No
Yes
Reference Manual
00809-0100-4107
SCROLL
ENTER
Rosemount 2051 Pressure Transmitter