System Readiness - Emerson Rosemount 3051G Quick Start Manual

July 2023
1

System readiness

1.1 Confirm HART
• If using HART based control or asset management systems,
please confirm the HART capability of those systems prior
to transmitter installation. Not all systems are capable of
communicating with HART Revision 7 protocol. You can configure
this transmitter for either HART Revision 5 or 7.
• For instructions on how to change the HART revision of your
transmitter, see
1.2 Confirm correct device driver
• Verify that the latest device driver (DD/DTM
systems to ensure proper communication.
• Download the latest device driver at
Group
1.2.1 Device revisions and drivers
Table 1-1
device driver and documentation for your device.
Table 1-1: Device revisions and files
Identify device
Software NAMUR
release software
date revision
Dec-11 1.0.0
Jan-98 N/A
(1) The NAMUR software revision is located on the hardware tag of the device. Use a
HART-capable configuration tool to read the HART software revision.
(2) Device driver file names use device and DD revision (such as 10_01). The HART
protocol is designed to enable legacy device driver revisions to continue to
communicate with new HART devices. To access new functionality, download the
new device driver. Emerson recommends downloading new device driver files to
ensure full functionality.
(3) HART Revision 5 and 7 selectable, safety certified, local operator interface, process
alerts, scaled variable, configurable alarms, and expanded engineering units.
Quick Start Guide
revision capability
®
Switch HART revision
provides the information necessary to verify the correct
Find device driver
HART HART
®
software universal
(1) revision (1) revision
01 7
5
178 5
mode.
) is loaded on your
™
Emerson.com
Review
instruc-
tions
Device Manual
revision (2) document
number
10 00809-010
0-4007
9
3 00809-010
0-4001
Quick Start Guide
or FieldComm
Review
function-
ality
Changes
to soft-
ware (3)
See (3) for
list of
changes.
N/A
5