Enable Snmpv3 And Manage The Settings - NETGEAR WAX214 User Manual

NETGEAR WiFi 6 AX1800/AX3600 Dual Band PoE/PoE+ Access Points, WAX214 and WAX218
Setting
Contact
Location
Community Name
(Read Only)
Community Name
(Read Write)
Port
IP Address
Community Name
7. Click the Apply button.
Your settings are saved and applied.

Enable SNMPv3 and manage the settings

You can enable SNMPv3 and manage the associated settings for the access point:
To enable SNMPv3 and manage the settings:
1. Launch a web browser from a computer or mobile device that is directly connected
over WiFi to the access point or connected to the same network as the access point.
2. Enter the IP address that is assigned to the access point.
If you are directly connected to the "CONFIG-ONLY" SSID, you can enter
https://www.aplogin.net.
A login window displays.
If you do not know the IP address, see Find the IP address of the access point on
page 33. For more information about the "CONFIG-ONLY" SSID, see 2.4 GHz
management SSID on page 58.
If your browser does not display a login window but displays a security message and
does not let you proceed, see Log in to the access point after you complete the initial
log-in process on page 35.
3. Enter the access point local device password and click the Login button.
Maintain the access point
Description
The contact name for SNMP management. This is an optional field for information
only.
The location for SNMP management. This is an optional field for information only.
The community string that enables the SNMP management station to read the access
point's MIB objects. The default is public.
The community string that enables the SNMP management station to read and write
the access point's MIB objects. The default is private.
The port number at which the SNMP management station must receive traps. The
default is 162.
The IP address of the SNMP management station that must receive traps.
The community name that is associated with the IP address that must receive traps.
The default is public.
100 User Manual