NETGEAR WAX214 User Manual page 101

NETGEAR WiFi 6 AX1800/AX3600 Dual Band PoE/PoE+ Access Points, WAX214 and WAX218
The local device password is the one that you specified. The password is
case-sensitive.
The Device Status page displays.
4. Under Management, select Advanced.
The page displays the advanced settings with the Management Mode section at the
top.
5. In the SNMP Settings section, select the Status Enable radio button.
By default, the SNMP settings are masked out and the Status Disable radio button
is selected.
6. Scroll down to the SNMPv3 Settings section and select the Status Enable radio
button.
By default, even if you enabled the SNMP settings (see the previous step), the SNMPv3
settings are masked out and the Status Disable radio button is selected.
7. Configure the SNMPv3 settings as described in the following table:
Setting
Username
Authorized Protocol
Authorized Key
Private Protocol
Maintain the access point
Description
Specify a name for the SNMPv3 user account. The name can be from 1 to 31
characters.
From the Authorized Protocol menu, select one of the following options for
authentication:
• MD5: The MD5 message-digest algorithm is used for authentication. You must
specify an authentication key for SNMPv3 access (see the Authorized Key).
• SHA: Secure Hash Algorithms (SHA) is used for authentication. You must specify
an authentication key for SNMPv3 access (see the Authorized Key).
• None: A user cannot access SNMPv3 information from an SNMP browser.
If you select MD5 or SHA from the Authorized Protocol menu, specify an
authorization key (password) in the Authorized Key field. The key can be from 8 to
32 characters.
From the Private Protocol menu, select one of the following options for encryption:
• DES: The information is encrypted with Data Encryption Standard (DES). You must
specify an encryption key for the SNMP traffic.
• None: The SNMP traffic is not encrypted.
101 User Manual