Mount Model Wax214 To A Wall - NETGEAR WAX214 User Manual

NETGEAR WiFi 6 AX1800/AX3600 Dual Band PoE/PoE+ Access Points, WAX214 and WAX218

Mount model WAX214 to a wall

To mount the access point to a wall:
1. The bottom of the access point includes two holes that let you mount the access
point on two screws inserted in a wall.
2. Mark the wall where you want to insert the provided anchors and screws, which must
be 3.875 in. (98.5 mm) apart.
3. Insert the anchors and screws, but leave about 0.25 in. (6 mm) of each screw
protruding from the wall so that you can insert the screws into the holes on the
bottom of the access point.
Mount Model WAX214 to a Wall
or Ceiling
142 User Manual