NETGEAR WAX214 User Manual page 114

NETGEAR WiFi 6 AX1800/AX3600 Dual Band PoE/PoE+ Access Points, WAX214 and WAX218
Table 5. Memory Information section (Continued)
Setting
Cached
Buffered
Table 6. LAN Information - IPv4 section
Setting
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
DHCP Client
Spanning Tree
Protocol (STP)
Table 7. LAN Information - IPv6 section
Setting
IP Address
Link-Local Address
Gateway
Monitor the access point and its
Network Connections
Description
The total memory in kB and the cached memory in kB and percentage.
The total memory in kB and the buffered memory in kB and percentage.
Description
The IPv4 address that is assigned to the LAN/PoE (model WAX214) or LAN/PoE+
(model WAX218) port of the access point. This is the IPv4 address over which you
can reach the local browser UI. For more information, see Specify a static IPv4 address
on page 40.
The subnet mask that is associated with the IPv4 address.
The IPv4 address of the gateway.
The IPv4 address of the primary DNS server.
The IPv4 address of the secondary DNS server, if any.
Shows whether the DHCP client of the access point is enabled (which it is by default).
For more information, see Reenable the DHCP client of the access point on page 42.
Shows whether STP is enabled. For more information, see Manage the STP settings
on page 43.
Description
The IPv6 address that is assigned to the LAN/PoE (model WAX214) or LAN/PoE+
(model WAX218) port of the access point. This is the IPv6 address over which you
can reach the local browser UI.
The link-local IPv6 address of the access point. For more information, see Specify a
link-local IPv6 address on page 41.
The IPv6 address of the gateway.
114 User Manual