Disable Or Enable A Wifi Network Or Set Up A Wifi Activity Schedule - NETGEAR WAX610 User Manual

Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual
network selection in your WiFi-enabled computer or mobile device to match the
current settings for your network.
• Does your WiFi device display as a connected client? (See View client distribution,
connected clients, and client trends on page 176.) If it does, it is connected to the
network.
• Are you using the correct WiFi network name (SSID) and password?
Disable or enable a WiFi network or set up
a WiFi activity schedule
You can temporarily disable a WiFi network (SSID or VAP), you can reenable the WiFi
network, or you can set up a schedule that specifies when the WiFi network is active.
Scheduling a WiFi network a green feature that allows you to turn off the WiFi network
during scheduled vacations, office shutdowns, on evenings, or on weekends.
For each WiFi network, you can create a single custom schedule. In that schedule, for
each day from 12:00 a.m. to 11:59 p.m., you specify the time or times that the VAP is
disabled.
To disable or enable a WiFi network or set up a WiFi activity schedule:
1. Open a web browser from a computer that is connected to the same network as the
access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
If your browser does not open the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 37.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 22.
The Dashboard page displays.
4. Select Management > Configuration > Wireless > Basic.
The page that displays lets you select an SSID.
Manage the Basic WiFi Features 59 User Manual