Using The Command And Response Tables - Extron electronics FOX3 Matrix Series User Manual

SIS responses return in the following format:
X)
{
NOTE: If multiple endpoints are defined in the command, responses from each
Example of endpoint I/O commands:
Command — {T1:1B}
Response — {T1}Vmt1
FOX3 Matrix System
FOX3 transmitters (inputs)
FOX3 receivers (outputs)

Using the Command and Response Tables

The
used in the table represent variables in the command and response fields. Command and
response examples are shown throughout the table. The SIS commands are not case
sensitive. The ASCII to Hex conversion table below is for use with the command and
response table.
Space
NOTES:
Special Characters
The switcher accepts all alpha-numeric characters except
the switcher, passwords, or locally created file names.
] X)
}response ( = Endpoint I/O designator)
endpoint are separated onto different lines.
}
]
Command and Response Table for SIS Commands
ASCII to Hex Conversion Table
• For commands and examples of computer or device responses used in this guide,
the character "0" is used for the number zero and "O" is the capital letter "o."
• Only instances marked with a • character require a space. Any spaces between
characters in the command and response tables are only inserted for ease of
reading.
• Unless stated otherwise, SIS commands are not case sensitive.
FOX3 Matrix Series Switchers • SIS Configuration and Control
Command — {T1:
Response — {T1}Zpx
Endpoint I/O Designators
Designation (
T (1 through xxx)
R (1 through xxx)
•
|
E ZXXX } } }
]
X) )
on page 29. Symbols
and "space", as the name of
26