Extron electronics FOX3 Matrix Series User Manual page 60

The Device View dialog populates with the selected Matrix information.
Figure 30. Populated Device View Dialog Box
6. Click the Device Config tab (see figure ,
7. In the Rename Device panel, enter the new name of the device in the text field. No
spaces are allowed in the name. Names should be significant identifiers. For example,
enter FOX3AT-1b8c78-24x-Mikes-desk-1 (
8. Click Apply ( ). A confirmation prompt opens.
3
Figure 31. Device Config Dialog Box
9. Click Yes (see figure 32,
Configuration dialog box. The new name is written to the Dante interface of the
Matrix. Repeat as necessary for all devices.
NOTE: The device name assigned in Dante Controller only applies to the Dante
interface and does not affect the device name recognized in DSP Configurator.
Figure 32. Rename Device Confirmation Dialog Box
) to open the Device Config page.
1
).
2
) to confirm the new name, then close the Device
4
FOX3 Matrix Series • Dante Controller 52