Extron electronics FOX3 Matrix Series User Manual page 13

Audio de-embedding — Any two-channel PCM audio signal from a transmitter or
•
analog return audio from a receiver can be extracted and independently routed.
Analog audio extraction — Four local stereo audio outputs provide audio from any
•
audio input, including any connected FOX3 transmitter, DMP expansion port, analog
audio input port, or Dante audio network.
Analog audio insertion — Four local stereo audio inputs can be routed to any audio
•
output, including audio to any connected FOX3 receiver, analog return audio to a FOX3
transmitter, the DMP expansion port, any analog output port, or a Dante audio network.
NOTE: The FOX3 Matrix 24x has only two analog inputs and outputs (
Integrated IPCP Pro Q xi control processor – IPCP Pro Models —
•
• AV LAN port allows AV devices to be isolated from the facility network
— Enables local control of AV devices connected to this port, while securing this
equipment from outside interference or intrusion.
• LAN port provides a secure network connection to facility LAN — Secures
the network connection to the product and is compliant with NIAP/Common criteria
and JITC network protocols.
• The LAN port will only permit discovery, setup and firmware updates for
Extron devices connected to the AV LAN port — Extron PCS, DSP and XTP
Configurator allow customers to discover, manage and update Extron devices from
the LAN to the AV LAN.
• Supports secure industry standard communications protocols — Uses
industry standard communication protocols, including HTTP (insecure), HTTPS,
SSH, SFTP, SMTP, NTP, Discovery Service, DHCP, DNS, ICMP, and 802.1X.
• DHCP server for AV LAN — Automatically distributes IP addresses and network
configuration parameters for AV devices connected to the local AV LAN, which
streamlines system setup and management.
• Supports 10/100/1000Base-T.
Multi-level password protection — Allows security to be set based on user
•
roles.
• Supports 802.1X Authentication — Provides support for IEEE 802.1X
authentication standard for port-based Network Access Control.
• USB-C Configuration Port — Enables local configuration of the IPCP Pro control
processor.
• Digital audio expansion port provides a connection to an Extron DMP 128 Plus
processor for audio system scalability — The DMP expansion port allows the
FOX3 Matrix and any non-AT DMP model to be linked together via a single shielded
CAT 6 cable. This creates a 16-channel bidirectional 24-bit/48 kHz high-resolution
digital audio expansion bus between the two units, allowing expanded input and output
signal management and routing capabilities.
• Dante audio network interface, DMP expansion port, and analog audio inputs
®
and outputs — The FOX3 Matrix features unique audio capabilities with leading-edge
audio matrix switching between any input and any output in the FOX3 systems.
• Audio breakaway — Offers the capability to separate an embedded audio signal from
its corresponding video signal within the matrix switcher, allowing two-channel PCM
audio and the video signal from one source to be routed to different destinations.
FOX3 Matrix Series Switchers • Introduction
50001-50002
).
5