Finding A Dante Device Ip Address - Extron electronics FOX3 Matrix Series User Manual

To rename a Matrix receiver or transmitter:
Figure 34.
From the Device menu on the Network View screen, select Device View, or press
1.
<Ctrl+D> on the keyboard. The Device View dialog box opens.
2. From the (Select a Dante Device..) drop-down list, select the name of the desired
Matrix (see figure ,
3. On the Device View screen, select the Receive tab or Transmit tab (
4. Click on the name of the receiver or transmitter to be renamed. The name becomes a
text box with a cursor (
5. Enter the new name (up to 31 characters) using any combination of letters, numbers,
and special characters except for @, =, and . (period).
6. Press <Enter> on the keyboard to confirm the name, or click another channel text box.
7. Repeat steps 4 through 6 to rename additional receiver or transmitter channels.
8. When finished renaming receivers and transmitters, close the Device View dialog box.

Finding a Dante Device IP Address

To find the IP address of a Dante device, the name of the device is needed (see
the Matrix in Dante Controller
NOTE: If the Matrix has not been renamed, its default name consists of the product
name followed by a hyphen, plus the last 6 digits of the device MAC address (for
example, FOX3AT-1b6c78).
Figure 35.
1. Open Dante Controller.
2. On the Dante Controller-Network View screen, click the Device Info tab (see
figure ,
On the Device Info page, locate the name of the Matrix in the Device Name column
3.
( ). The IP address is located in the Primary Address column (
2
address for the connected Matrix is 192.168.254.254.
Device View Screen — Renaming a Receiver or Transmitter
).
1
).
3
on page 157).
Device Info Page
).
1
). In figure , the IP
3
FOX3 Matrix Series • Dante Controller
) as desired.
2
Renaming
54