Roles And Permissions Panel - Extron electronics FOX3 Matrix Series User Manual

3.
Double-click the firmware file name.
The Open window closes, and the
selected firmware file name appears
in the Update Firmware panel on the
web page.
4. Click UPDATE to begin (see figure 46).
To cancel the update, click the X
button in the Update Firmware
panel.
During the updating process, a
window appears in the middle of the
screen, showing messages giving the progress Installing the Firmware, and
Rebooting Device.
When the update is completed, the message window closes and the message
Firmware Upload Complete appears near the top of the screen. The new firmware
filename appears beside Version in the Firmware panel.

Roles and Permissions Panel

The Roles and Permissions panel (see figure 41,
Admin and User passwords have been set. It does not display the actual password.
NOTE: The following rules apply to passwords:
• Length is 1-128 characters.
• All human-readable characters are permitted except |.
• The password cannot be a single space.
• Passwords are case-sensitive.
If the Admin or user password is cleared, the password defaults to extron.
•
• The factory configured passwords for all accounts on this device have been set to
the device serial number. In the event of a complete system reset, the passwords
convert to the default, which is extron for the Admin and User.
To assign a administrator and user passwords:
1. In the Roles and Permissions panel,
click EDIT (see figure 47). The Role
and Permission Settings dialog box
opens.
In the Admin panel, click the Change
2.
Admin Password link and enter the
new administrator password in the field
below (see
3. Click in the Confirm Admin Password
field and enter the password from the
Change Admin Password field.
4. To assign a user password, repeat steps 2 and 3 in the User panel.
figure 48 on page 65).
FOX3 Matrix Series Switcher • Internal Web Page
Figure 46. Firmware Update Dialog Box
, on page 61) displays whether
5
Figure 47. Roles and Permissions Panel
64