Extron electronics FOX3 Matrix Series User Manual page 55

Exit
Disconnect connected devices and close the application.
From the Software menu, select Exit. If device tabs are open, the Exit dialog box
1.
opens (see figure 26).
Figure 26. Exit Dialog Box
2. Click the Close Session(s) and Exit button (
connected devices, close all offline device tabs, and close the software.
Alternatively, click the Cancel button (
Device Menu
The Device menu (see figure 27) contains options pertaining to device connection,
configuration, and information. For details, see the FOX3 Matrix Series PCS Help File.
Figure 27. Device Menu
Disconnect — Disconnect the device from the PCS program and close the Device
•
tab.
• Settings — Open a submenu with the following options:
• Hardware Settings — Display the Hardware Settings dialog box with device
information and side tabs to change the device name, internal clock, and password
of the connected device.
It also contains an Edit Communication Settings button, which provides an
alternative method of accessing the Communication Settings dialog box.
Communication Settings — Open the Communication Settings dialog box to
•
change IP settings of the connected device.
Reset Device — Open the Reset Device dialog box, with selectable modes for
•
resetting the connected device, as well as the Unit Information (also displayed in the
Hardware Settings dialog box).
NOTE: The factory configured passwords for all accounts on this device have
been set to the device serial number. In the event of a complete system reset, the
passwords convert to the default, which is extron for the Admin and User (see
Roles and Permissions Panel
FOX3 Matrix Series Switcher • Product Configuration Software
) to disconnect the software from
1
) to leave the software open.
2
on page 64 to change a password).
47