Note
Changes to the driving curve parameters are accepted with the door at a complete stop or in the
OPEN or CLOSED position.
Risk of injury due to moving mechanical parts
After changes to the parameters of the door the permissible energies and forces have to be
checked by service staff and adjusted if they exceed their limit values.
Menu navigation
You can find the menu navigation for the SIDOOR SERVICE TOOL in the section Navigation
structure in the SIDOOR SERVICE TOOL (Page 144).
AT40 and ATD400V for elevators
System Manual, 06/2022, A5E42192709-AH
WARNING
Optional additional units
8.1 SIDOOR SERVICE TOOL
143