Select Double-Wide Mode; Cancel Double-Wide Print - Intermec 6822P User Manual

Chapter 4 — Control Code Definitions
50

Select Double-Wide Mode

Enables expanded print for the current line only. The mode set
previously returns on subsequent lines. However, expanded print can be
canceled with cancel expanded print, DC4 or ESC "W" (0), before end
of current line, or wrapping of the print buffer. This works with all three
pitches (Pica, Elite, Compressed).
This mode is also terminated by the execution of a Carriage Return, Line
Feed, Form Feed, Vertical Tab or wrapping of the print buffer.
Note: This function is not supported in DBCS.
Format
Decimal
27 14
14

Cancel Double-Wide Print

Cancels expanded print for the current line only. Modes set previously
return on subsequent lines. However, it does not cancel expanded mode
set by select double-wide (expanded) mode, ESC "W" (1) or Master
Select, ESC "!".
Note: This function is not supported in DBCS.
Format
Decimal
27 20
20
Hex
1B 0E
0E
Hex
1B 14
14
6820 Series 80-Column Printer User's Manual
ASCII
ESC SO
SO
ASCII
DC4
DC4