Inserting a Computer in the Terminal Holder
6822 Series 80-Column Printer User's Manual
3 Once the paper is properly positioned, press the Set Page button to
clear the Paper Out light and indicate where the top of the page is.
4 Close the printer lid. Make sure the paper passes through the paper
slot when the printer begins to print.
Note: When removing the computer, do not press the computer keys
against the terminal slide retainer. Always store the computer in the
terminal holder.
The fixed mount or portable printers have terminal holder options for the
700 Series, CK60, and the CN3 Series computers.
To insert a 700 Series, CK60, or a CN3 in a terminal holder
1 Insert the top of the computer into the terminal slide retainer.
2 Use the computer to push the terminal slide all the way in the
direction shown.
3 Lower the connector end of the computer into the terminal holder.
4 Slide the computer to fully seat it in the docking connector.
Inserting a Computer in a Terminal Holder
Chapter 2 — Installing the 6820 Printer
17