Chapter 4 — Control Code Definitions
Set Inactivity Time for Sleep Mode
Line Feed
40
Sets the amount of time the printer waits before it goes into low-power
mode. The factory default is 10 seconds.
Format
Decimal
27 122 n
Perform Line Feed
Prints and then clears the contents of the print buffer, resets the character
count to zero; and advances the printhead to the next print line, using the
current spacing. The position of the carriage is not affected and a
carriage return is not executed.
Format
Decimal
10
Perform n/216-inch Line Feed
Advances the paper to n/216 of an inch. This does not affect subsequent
line feeds. Range of n is 0-255.
Format
Decimal
27 74 n
Hex
1B 7A n
Hex
0A
Hex
1B 4A n
6820 Series 80-Column Printer User's Manual
ASCII
ESC "z" n
ASCII
LF
ASCII
ESC "J" n