Read Module Version - Intermec 6822P User Manual

Appendix B — Bluetooth Configuration Commands and Specifications
126
Device pairing and bonding are associated with this command and works
as follows:
After an L command is executed the current device pairing and bonding
is deleted. The next device to connect becomes paired and bonded to the
module.
In Modes L1 and L2, other devices are allowed to connect but only the
first device to connect is paired and bonded. Other devices are always
required to supply a PIN code to complete the connection.
In Mode L3, only one device is allowed to connect. This device is paired
and bonded and needs to supply the PIN code only on the initial
connection.
Note: Some of the Bluetooth user interfaces cannot supply a
NULL string as a PIN code. Use the S4 command to specify a
PIN code that is not NULL.

Read Module Version

Command
Description
Example
Note: This command responds with the requested data, only
not the "ACK<CR>".
V0<CR>
Displays the firmware build version currently
running
"V0<CR>"
Returns: "v1yyyymmddHHMM<CR>"
6820 Series 80-Column Printer User's Manual