Intermec 6822P User Manual page 30

Chapter 2 — Installing the 6820 Printer
Thumbwheel
(green)
Adjusting the Pinfeed Holders
16
4 Ensure that the paper is smooth (no folds, bulges, bows, etc.)
between the pinfeed holders. If so, push the locking tab down on the
pinfeed holder that you adjusted.
To feed paper into the printer
1 Press Form Feed button to feed the paper into the printer.
2 Lower the paper bail. An empty printer auto feeds new paper
approximately 0.25 cm (0.1 in) beyond the top of the paper bail.
Note: The ideal distance to feed paper beyond the paper bail may vary
due to environmental conditions (such as humidity) and specific aspects
of certain paper. Use the green thumb wheel to position the paper to a
desired distance according to your conditions.
Note: If your paper has a preprinted logo on every page, make sure the
printhead is below the preprinted logo. If not, you can adjust the
position of the paper, either by pressing the Line Feed button, or by
using the green thumb wheel.
Locked pinfeed
holder locking tab
Pinfeed
holder
6822 Series 80-Column Printer User's Manual
Released pinfeed
holder locking tab