Set Local Bluetooth Device Name; Set Class Of Device/Service Field; Set Service Name - Intermec 6822P User Manual

6820 Series 80-Column Printer User's Manual
Appendix B — Bluetooth Configuration Commands and Specifications
Example Commands (continued)
Command
"?T0<CR>"
"?B0<CR>"
Note: These commands are only available over the serial link, not
over the air and are not available when the device is in the
Bluetooth Link Active State.

Set Local Bluetooth Device Name

Command
Definition
Default
Example

Set Class of Device/Service Field

Command
Description
Example

Set Service Name

Command
Description
Definition
Default
Function
"t0Shutdown Timer = 5 minutes<CR>"
"b0No Devices PairedCR>"
F0<Device Friendly Name><CR>
"Device Name" — String up to 254 bytes long
"6820-DDEEFF" where DDEEFF is from the
(AABBCCDDEEFF) Bluetooth device address
"F01Len's 100%25 serial module<CR>"
This sets the name to "Len's 100% serial module."
S1< Class of Device/Service field >
The Class of Device/Service (CoD) field is a 24-bit
field defined in the Bluetooth Assigned Numbers
document. This field is sent in a HEX ASCII
format, most significant byte first.
"S1001F00<CR>" is a common Class of Device
value for a basic serial device.
S2<Service Name>
Sets the service friendly name to send to the remote
Bluetooth device in response to a service discovery
request. The length of the service name is limited to
32 bytes.
Profile Name — text name entered into the SDP
record for the serial port profile
"Wireless Printer"
123