Appendix B — Bluetooth Configuration Commands and Specifications
Persistent Storage
System Behavior/Software Considerations
130
•
the Bluetooth module sends a shutdown signal after a configurable
amount of time. Default is two hours of idle time
Note: The adapter complies with Bluetooth 1.1 specification,
including bonding for authentication and enabling encryption.
The following settings do not reset after you cold boot on the printer:
•
Bluetooth Bonding Enable/Disable
•
Bluetooth Encryption Enable/Disable
•
Bluetooth Passkey
•
Bluetooth Bonding List (Link Keys)
•
Bluetooth Device Name
•
Bluetooth Class of Device
•
Discoverable setting
•
Connectable setting
•
Radio Shutdown Timer Timeout (default two hours of idle time)
•
Discoverability — The default mode is discoverable.
When configured to be discoverable, the adapter is discoverable at all
times, except when:
•
an active Bluetooth connection exists.
•
you have just completed a "pass-through printing" print job.
•
the shutdown time has elapsed (default shutdown time is two
hours).
•
Connectability — The default mode is connectable.
When configured to be connectable, the printer is connectable at all
times, except when:
•
an active Bluetooth connection exists.
•
you have just completed a "pass-through printing" print job.
6820 Series 80-Column Printer User's Manual