Select Emphasized Print Mode; Cancel Emphasized Print Mode; Define Intercharacter Space - Intermec 6822P User Manual

Chapter 4 — Control Code Definitions
52

Select Emphasized Print Mode

Enables emphasized print mode until cancel emphasized mode is
encountered. The text is made bolder by printing each dot twice, with the
second dot slightly to the right of the first dot. Factory default disables
emphasized mode.
Note: This function is not supported in DBCS.
Format
Decimal
27 69

Cancel Emphasized Print Mode

Cancels emphasized print mode.
Note: This function is not supported in DBCS.
Format
Decimal
27 70

Define Intercharacter Space

Defines the amount of space to the right of each character, in addition to
the space allowed in the character design. The variable n represents the
number of units of space, with each unit equal to 1/120 of an inch. Range
of values for n is 0-63 with a factory default of 0.
Format
Decimal
27 32 n
Hex
1B 4B
Hex
1B 46
Hex
1B 20 n
6820 Series 80-Column Printer User's Manual
ASCII
ESC "E"
ASCII
ESC "F"
ASCII
ESC SP n