Cpu Reset - Icom IC-V8 Instruction Manual

11
OTHER FUNCTIONS
D D Mic simple mode
This item turns the microphone simple mode
ON and OFF. Microphone simple mode is
used to change the function assignments for
keys in the optional HM-75A
- as below. This assign-
SPEAKER MICROPHONE
ment is convenient for 3-channel use of sim-
ple operation.
• mIC.N1 : Normal 1 (default)
• mIC.N2 : Normal 2
• mIC.Sm : Simple mode
HM-75A
Mode NORMAL1
key
Freq. [B•
CALL
[A]
CH Null
Freq. VFO/Memory
[B]
CH Null
Freq. Freq. Up
[∫]
CH Memory CH Up
Freq. Freq. Down
[√]
CH Memory CH Down Memory CH Down
NOTE:
Turn power OFF when connecting the HM-75A to the trans-
ceiver.
VFO mode cannot be selected via the microphone when SIM-
PLE mode is selected.
53
Optional HM-75A required
F
MR
-
REMOTE CONTROL
F
MR
NORMAL2 SIMPLE
]
[SQL] [SQL]
VFO/Memory
[B•
CALL
Null
Freq. Up
MR-00CH
Memory CH Up
Freq. Down
MR-01CH

' ' CPU reset

TX
The function display may occasionally display erroneous informa-
tion (e.g. when first applying power). This may be caused by exter-
nally by static electricity or other factors.
TX
If this problem occurs, turn power OFF. After waiting a few seconds,
turn power ON again. If the problem persists, perform CPU reset-
ting operation as following procedure.
• Turn power on while [SQL] and [D•
pushed.
CAUTION:
Resetting the CPU returns to all programmed
contents to their default settings.
]
11
OTHER FUNCTIONS
POWER ON
AT
] are
CLR
54