Tools - Extron electronics SMX Series User Manual

SMX Control Software, cont'd
• Restore Matrix settings from... — Select this and follow the on-screen
N All current settings (ties, presets, Virtual plane, and audio settings) unless
• Save This-Session's settings — Select this and follow on-screeen prompts to
N The Last-Sessions saved settings within the same *.ini file will be overwritten.
• Restore the Last-Session's settings — Select this and follow on-screeen
N This-Session's settings (ties, presets, rooms, and audio settings) will be
• Select printer — Selecting this opens a second drop down box listing the
• Print Tie Maps — Select this to print the tie map in the active window to the
• Exit — Select this to close the SMX control program. Current settings are
N Alternatively, click on the red X in the top right corner

Tools

This drop down menu (see figure 5-4)has the following items:
Assign Device Icons, Edit Device Palette, RGB Delay settings, Audio-input Gain
Settings, Audio Output Volume settings, Mute-Output settings, HD-SDI Re-
clocker Rate settings, EDID settings, View Input Frequencies, Update Firmware...,
IP Options, HTML File Manager, Hardware Status, Physical Switcher config,
Virtualize..., Name Presets, Show RS-232 Strings, and Initialize....
Figure 5–4 — Tools menu
• Assign Device Icons — Select this if you wish to customize the main widow
input and output boxes by adding specific device icons. This opens a new
window showing input and output device icons. Drag and drop an icon onto the
applicable input or output boxes as desired.
N Alternatively, clicking on either input or output boxes opens the relevant icon
SMX System MultiMatrix Switchers • SMX Control Software
5-6
prompts to restore saved Matrix settings files (*.mtx) and overwrite the
current Matrix settings.
already saved, will be lost.
save the specific session's settings (ties, presets, rooms, and audio settings) to
file (*.ini) which can be used for for later restoring those settings.
prompts to restore the Last Session's settings from a saved file (*.ini).
overwritten in favor of the Last Session's settings.
available printers connected to the PC.
default or currently selected printer.
maintained and loaded upon restart.
to close the SMX Control Program.
window. Drag and drop an icon onto the boxes.