Setting The Mail Server Domain Name; Entering E-Mail Addressee Information - Extron electronics SMX Series User Manual

3. Press the Tab key on the keyboard or click in another field to exit the mail
server IP address field.
4. Click the Take button to make the address change take effect.

Setting the mail server domain name

The Mail Server Domain Name field displays the domain name that the SMX
switcher uses to log on to the e-mail server. Standard domain conventions (such as
nnnnn@xxx.com) apply.
N The following characters are invalid in a domain name:
+ ~ , = ' [ ] { } < > ' " " ; : | \ ? and space. The @ character is
acceptable only as the lead-in to the domain name (such as @folklore.net).
Edit this field as follows:
1. Click in the Mail Server Domain Name field. The graphic cursor becomes a
text cursor.
2. Edit the name as desired.
Press the Tab key on the keyboard or click in another field to exit the Mail
3.
Server Domain Name field.
Click the Take button to make the name change take effect.
4.

Entering e-mail addressee information

The eight E-mail Addressee fields permit the administrator to identify the e-mail
addresses of the personnel to whom the SMX switcher e-mails notification of its
failure and repair status. Figure 5-15 shows a typical e-mail from the switcher.
Figure 5–15 — Typical SMX e-mail
The radio buttons and check boxes associated with each address field permit the
administrator to specify specific e-mail requirements for each recipient.
Edit these fields and controls as follows:
1. Click in the desired E-mail Addressee field. The graphic cursor becomes a text
cursor.
2. Edit the e-mail address as desired. Standard e-mail address conventions
(such as nnnnn@xxx.com) apply.
3. Press the Tab key on the keyboard or click in another field to exit the e-mail
addressee field.
4. Use the check boxes associated with each addressee to select the options about
which the addressee will be e-mailed: missing input(s) and/or power supply.
SMX System MultiMatrix Switchers • SMX Control Software
5-23