Extron electronics SMX Series User Manual page 126

Multimatrix switcher
Table of Contents

Advertisement

Video input— SMX 44/48/84/88 DVI
Number/signal type ..................... 4 or 8 (depending on model) digital RGB single-link DVI-D (or HDMI*)
Connectors ..................................... 4 or 8 female DVI-I
Equalization ................................... Automatic
Input cable length ......................... >50' (15.24 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p
N
The transmission distance varies depending on the signal resolution and on the type of cable,
graphic card, and display used in the system.
Video output— SMX 44/48/84/88 DVI
Number/signal type ..................... 4 or 8 (depending on model) digital RGB single-link DVI-D (or HDMI*)
Connectors ..................................... 4 or 8 female DVI-I
Re-clocking ..................................... Automatic
Peripheral device power .............. 250 mA per output
Video — SMX 44/48/84/88 DVI PRO
N
*Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output.
Routing
SMX 44 DVI PRO .............. 4 x 4 matrix
SMX 48 DVI PRO .............. 4 x 8 matrix
SMX 84 DVI PRO .............. 8 x 4 matrix
SMX 88 DVI PRO .............. 8 x 8 matrix
Gain ................................................. Unity
Resolution range ........................... Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link
Signal type ...................................... Single-link DVI digital video signals are supported.
Digital video ...................... RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component
N
These SMX DVI PRO Series boards are compatible with HDMI 1.3.
Digital audio ...................... Supports HDMI audio (if using an HDMI to DVI adapter) transmitted
Consumer Electronics Control (CEC)
EDID and DDC .................. Supports Extended Display Identification Data (EDID) and Display Data
HDCP .................................. Compliant with High-bandwidth Digital Content Protection (HDCP) using
HPD ..................................... Supports hot plug detection (HPD) of display as a pass-through signal.
Maximum data rate....................... 6.75 Gbps (2.25 Gbps per color)
Maximum pixel clock ................... 225 MHz
Standards ........................................ DVI 1.0, HDMI 1.3
Switching speed ............................ 200 ns, max.
DVI standard) @ 60 Hz
video (HDMI), actively buffered (supports all single link DVI and HDMI (if
using an optional adapter) standards from 640x480 @ 60 Hz to 1600x1200 @
60 Hz computer video)
through the RGB and Y, Cr, Cb lines, actively buffered.
Supports CEC wired infrared data pass-through using the HDMI 1.3
standard.
Channel (DDC) data using DVI and HDMI standards. EDID and DDC
signals are actively buffered.
DVI and HDMI 1.3 standards
SMX System MultiMatrix Switchers • Reference Information
B-7

Advertisement

Table of Contents
loading

Table of Contents