Tools.menu - Extron electronics CrossPoint 450 Plus Series User Manual

Matrix Software, cont'd
Tools menu
Assign Device Icons — Displays the complete set of input
Edit Device Palette — Allows you to add your own device
RGB delay settings — Displays the switching interval
Audio-Input gain settings — Displays the audio gain
Audio-Output volume settings — Displays the audio output level setting for
Mute-Output settings — Displays the RGB Delay, Volume, and Mute Adjust screen,
View input frequencies — (DSVP) Displays the input horizontal and vertical
Update Firmware — Allows you to replace the firmware that is coded on the
IP options — Allows you to set IP options. See "IP Settings/Options window" on
HTML file manager — Displays a list of HTML files installed on the switcher and
5-20 CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software
and output device icons. You can drag any of these
icons to the input and output boxes.
icon graphics.
setting for each input and allows you to change them.
level setting for a single input or for all inputs and
allows you to change it. The level is expressed as
the magnitude (number of decibels) and polarity
(positive [gain] or negative [attenuation]) of the audio
adjustment.
a single input or for all inputs and allows you to change it. The level is
expressed as a percentage of the input audio volume that is applied to the
output; 0% is full attenuation (audio is silent), 100% is full volume.
which allows you to mute and unmute individual or all video or audio
outputs.
frequencies for each input.
switcher's control board without taking the switcher out of service, opening
the switcher enclosure, and replacing the firmware chip set. See "Updating
firmware" on page 5-12.
page 5-8.
allows you to upload custom files from a connected PC to the switcher. See
"Uploading HTML files" on page 5-18.