Command/Response Table For Sis Commands (Continued) - Extron electronics SMX Series User Manual

Command/response table for SIS commands (continued)

Command
Front panel lockout (executive mode)
Lock front panel
(Advanced functions)
Lock front panel
Unlock front panel
View front panel lock
status
N For full Lock mode details, refer to chapter 3, "Setting the Front Panel Locks (Executive Modes)" section.
Information requests
N Firmware version/part number/information Primary BME only.
Query firmware version
Example:
Query firmware and build
version
Query kernel firmware
and build version
Query verbose version
information
N The firmware that is currently running is marked by an asterisk (*). A question mark (?.??) indicates that only factory
firmware is loaded. A caret (^) indicates the firmware that should be running, but a Mode 1 reset was executed and the
default factory version is loaded . An exclamation point (!) indicates corrupted firmware.
Example 0Q
Description
1.23 –
Response: 0.14(0.20-32x32 Series – Wed, 04 Jan 2006 23:11:29 GMT) – 1.00*(0.24-32x32 Series – Thu, 20 Apr 2007 20:02:35 GMT)
Ethernet protocol
firmware
Query firmware version
Query bootstrap version
Query factory firmware
version
Query updated firmware
version
N The 3Q and 4Q responses indicate the web version, a brief description (model used on), and the date the last version was
uploaded. For example, a typical 4Q response is; [1.09*(1.77-SMX Series -Wed, 01 Apr 2009 18:35:43 GMT)], indicating
loaded firmware version is 1.04, web version is 1.77 for the SMX, uploaded Wednesday, April 1st 2009 at 6:35 pm GMT)
X(
= Executive mode/mute status: (here executive mode): 0 = disabled, 1 = enabled (basic and admin lock),
N
2 = enabled (basic only)
X2!
= Version number
ASCII command
(host to switcher) (switcher to host)
2X
Exe2
1X
Exe1
0X
Exe0
X( ]
X
X2!]
Q
Q
1.00
Ver01*
X2!]
*Q
Bld
X2!]
**Q
Lib
0Q
sum of responses from 2Q-3Q-4Q
Ver00* sum of responses from 2Q-3Q-4Q
* indicates the version running
SMX firmware version
X2!]
1Q
Ver01*
X2!]
2Q
Ver 02*
X2!]
3Q
upload date/time)
X2! ]
Ver 03* (plus web ver. -desc-upload date/time)
X2!]
4Q
upload date/time)
X2! ]
Ver 04* (plus web ver.-desc -upload date/time)
x.xx
SMX System Multimatrix Switcher • Programmer's Guide
Response
]
]
]
]
X2!]
X2! ]
X2!]
Updated firmware version
X2! ]
X2! ]
(plus web ver.-desc-
]
]
(plus web ver.-desc-
]
]
verbose mode (2 or 3)
Additional
description
Enable advanced executive
mode.
Enable executive mode.
Disable executive mode.
X(
= executive mode status
The firmware version is 1.00
(sample value).
(verbose mode 2 or 3)
(verbose mode 2 or 3)
(verbose mode 2 or 3)
]
]
verbose response
Upload date and time
verbose mode (2 or 3)
verbose mode (2 or 3)
verbose mode (2 or 3)
4-11