Using The Command/Response Table For Ip Sis Commands; Symbol Definitions - Extron electronics SMX Series User Manual

Programmer's Guide, cont'd

Using the Command/Response Table for IP SIS Commands

The command/response table begins on page

Symbol Definitions:

X5!
N
X5@
X5#
X5$
sensitive.
N
First character must be an alpha character, the last must not be a hyphen.
X5%
X5^
N
X5&
N
X5*
X5(
X6)
N
X6#
X6^
X6&
X6*
X6(
X7)
X7#
4-18 SMX System Multimatrix Switcher • Programmer's Guide
= Specific port number (01-99)
The port number is represented as two ASCII characters (2 bytes) {e.g. port 05
would be represented as 30 35 in hex]. 00 = reserved,
= GMT offset (–12.0 through +14.0). Hours and minutes removed from GMT
= On/Off status: (0 = off disable, 1 = on/enable)
= Unit name; text string up to 24 characters (A-Z, 0-9 and "-"). Not case
The following characters are invalid in the name: {space} ~ , @ = , ' [ ] { } < > '
" ; : | \ and ?.
= Time and date (set and read) MM/DD/YY•HH:MM:SS :
MM = month: 01 (January) through 12 (December)
DD = day: 01 through 31
YY = year: 00 through 99
HH = hour: 00 through 23
MM = minutes: 00 through 59
SS = seconds: 00 through 59
= IP/Gateway address: ###.###.###.###
Factory default IP/Gateway address: 192.168.254.254
= Email domain name (Standard name conventions apply e.g., xxx.com)
The following characters are invalid in a domain name: {space} + ~ , = ' [ ]
{ } < > ' " ; : | \ and ?. The @ character is only acceptable as lead-in to the
domain name (such as @extron.com)
= Hardware (MAC) address (##-##-##-##-##-##)
= Default name SMX-##-##-##
= Subnet mask (###.###.###.###)
Leading zeros in each of 4 fields are optional in setting values, and suppressed
in return values.
= Verbose mode: 0 = Clear/none (default for Telnet connection)
1 = Verbose mode (default for RS-232/RS-422 connection)
2 = Tagged responses for queries
3 = Verbose mode and tagged for queries
= Baud rate: 9600 (default), 19200, 38400, 115200
= Parity: odd, even, none, mark, space (only first letter required)
= Data bits 7, 8
= Stop bits 1, 2
= Port type 0 = RS-232 (default), 1 = RS-422, 2 = RS-485
= Web page priority flag: 0 = Internal (default factory reset), 1 = User.
4-20.