Tools Menu - Extron electronics FOX 4G Matrix 14400 User Manual

Tools menu

Assign Device Icons — Displays the complete set of input
and output device icons. You can drag any of these
icons to the input and output boxes.
Edit Device Palette — Allows you to add your own device
icon graphics.
Mute-Outputs settings — Displays the Mute Adjust screen,
from which you can mute each output.
Update Firmware — Allows you to replace the firmware
that is coded on the switcher's control board without
taking the switcher out of service. See "Updating
firmware" on page 4-12.
IP Options — Allows you to set IP options. See "IP
Settings/Options window" on page 4-7.
Hardware status — Provides an overall view of the status
of the matrix switcher, including the power supply voltages, the internal
temperature, the Remote RS-232/RS-422 port configuration, and the installed
and updated firmware status (figure 4-15).
Figure 4-15 — Status window
Green — Proper operation.
Red — Component has failed.
FOX 4G Matrix 14400 Switcher • Matrix Software 4-19