Installing The Shock Absorber; Removing The Seat - Husqvarna TC 65 2020 Owner's Manual

11.25

Installing the shock absorber

11.26

Removing the seat

SERVICE WORK ON THE CHASSIS 11
–
Take the brake line
–
Remove screw
as far as possible without blocking the rear wheel. Secure the
rear wheel in this position.
–
Remove screw
F02254-10
Main work
–
Position the shock absorber and mount and tighten
1
screw .
Guideline
Screw, top
shock absorber
–
Mount and tighten screw
Guideline
F02254-11
Screw, bottom
shock absorber
–
Secure brake line
–
Position splash protector
ings and tighten.
Guideline
Screw, splash pro-
tector
F02253-11
Finishing work
–
Install the main silencer. (
–
Install the right side cover. (
–
Remove the motorcycle from the lift stand. (
–
Open quick release
–
Pull back the seat and remove it.
S01515-10
3
out of the holders.
4
and lower the rear wheel with the link fork
5
and shock absorber.
M10 45 Nm (33.2 lbf ft)
2
.
M10 45 Nm (33.2 lbf ft)
3
in the holder.
4
, mount screws
EJOT PT ® 2 Nm (1.5 lbf ft)
K60x25-Z
p. 58)
p. 51)
1
and raise the rear of the seat.
®
Loctite 243™
®
Loctite 243™
5
with bush-
p. 40)
55