Adjusting The Chain Guide; Checking The Frame; Remove Screw; Mount And Tighten Screw - Husqvarna EE 5 2021 Owner's Manual

13 SERVICE WORK ON THE CHASSIS
13.27
13.28
60
M01693-01

Adjusting the chain guide

Info
The size of the chain wheel varies with the number of teeth. The chain guide can be adjusted on small
sprockets.
M01693-10

Checking the frame

M01652-01
–
Check that the chain guide is firmly seated.
» If the chain guide is loose:
–
Tighten the screws on the chain guide.

Guideline

Remaining
screws, chassis
Finishing work
–
Remove the motorcycle from the lift stand. (
–
1

Remove screw

.
–
Position the chain guide.
–
Mount and tighten the screw.
Guideline
Remaining screws,
chassis
–
Check the frame for cracks and deformation.
» If the frame exhibits cracks or deformation due to a
mechanical impact:
–
Change the frame.
Info
Always replace a frame that has been
damaged due to a mechanical impact. Repair
of the frame is not authorized by Husqvarna
Motorcycles.
M6 10 Nm (7.4 lbf ft)
p. 45)
M6 10 Nm (7.4 lbf ft)