18 ENGINE
18.5.34
18.5.35
224
Installing the alternator cover
Installing the valve cover
O
Raise rocker arm
on the outside.
8
Remove shims
and set down in the position in which they
were installed.
-
Correct the shims according to the findings from checking
the valve clearance.
Insert suitable shims.
Install the camshaft.
(a
Install the timing chain tensioner.
-
Check the valve clearance.
Q.
Mount locating pins
Position the alternator cover. Mount screws
and tighten after all of the alternator cover screws have been
mounted.
Guideline
Screw, alternator
cover
C,
Mount screws
and tighten all screws in a crisscross pat
tern.
Guideline
Screw, alternator
cover
Position the valve cover seal.
Position the valve cover. Mount and tighten screws
Guideline
I Screw, valve cover
p. 222)
(a
p. 222)
(a
p. 223)
Position alternator cover gasket@.
CD
with washer
M6x25
10 Nm (7.4 lbf ft)
M6x25
10 Nm (7.4 lbf ft)
O.
M6
10 Nm (7.4 lbf ft)
..
..
..