Removing The Water Pump Cover; Removing The Clutch Cover - Husqvarna FE 450 2014 Repair Manual

18.3.21

Removing the water pump cover

18.3.22

Removing the clutch cover

@) .
Take off pin
(D
Remove pin upward.
@.
Remove O-ring
O.
Remove screws Take off the water pump cover.
Take off the water pump cover seal.
O.
Remove screws Take off the clutch cover.
• Info
I
If work is to be performed on the water pump,
unscrew the nut of the water pump impeller.
Take out dowels@. Take off clutch cover gasket
18 ENGINE
8.
167