Removing The Stator - Husqvarna FE 450 2014 Repair Manual

Stator winding - check for a short circuit to ground (terminal 31)
Measure the resistance between the specified points.
Stator, connector
I
Resistance
If the value displayed does not meet specifications:
Change the stator.
22.4

Removing the stator

Stator winding, measurement II - check the resistance
0 Measure the resistance between the specified points.
Stator, connector
3
Alternator
Resistance of stator
winding at: 20 °c (68 °F)
If the value displayed does not meet specifications:
- Change the stator.
EZ
601211-10
EZ pin 1 - Measuring point Ground
I
Condition
The alternator cover has been removed.
Remove screw
Remove cable support sleeve
Remove screws
Take the stator out of the alternator cover.
22 IGNITION SYSTEM
EZ pin 1 - Stator, connector
I
0.368 ... 0.552 Q
(-)
oo Q
O
and take off the cable holder.
8
from the alternator case.
fD.
EZ pin
241