Checks And Maintenance Steps For Winter Operation - Husqvarna FE 450 2014 Repair Manual

26 CLEANING, CARE
256

Checks and maintenance steps for winter operation

Info
If you use the vehicle in winter, you must expect salt on the roads. You should therefore take precau­
tions against aggressive road salt.
If the vehicle was operated in road salt, clean it with cold water after riding. Warm water would enhance
the corrosive effects of salt.
401060-01
-
Treat bare metal (except for brake discs and the exhaust sys­
tem) with a corrosion inhibitor.
Preserving materials for paints, metal and rubber
p. 309 )
( �
-
Treat all plastic parts and powder-coated parts with a mild
cleaning and care product.
(FE EU/AU)
-
Grease steering lock.
I
Universal oil spray (!!,!l
-
Clean the motorcycle. (!!,!l
-
Clean the brake system.
Info
After EVERY trip on salted roads, thoroughly wash the
brake calipers and brake linings, in the cooled down
and installed state, with cold water and dry carefully.
After riding on salted roads, thoroughly wash the vehi­
cle with cold water and dry it well.
-
Treat the engine, swingarm, and all other bright and zinc­
plated parts (except for the brake discs) with a wax-based
corrosion inhibitor.
Info
Corrosion inhibitor is not permitted to come in contact
with the brake discs as this would greatly reduce the
braking force.
-
Clean the chain. ( p. 118)
�
p. 309)
p. 255)
..