Table of Contents
Advertisement
21
LUBRICATION SYSTEM
236
Mount and tighten screw plug @ with the gear oil screen
and the O-rings.
Guideline
Screw plug, gear oil
screen
C,
-
Position oil screen
with the O-rings on a pin wrench.
-
Insert the pin wrench through the drill hole of the screw plug
and into the engine case on the opposite side.
-
Push the oil screen all the way into the engine case.
-
Mount and tighten screw plug
Guideline
Screw plug, engine
oil screen
-
Mount and tighten the oil drain plug
a new seal ring.
Guideline
Oil drain plug with
magnet
-
Remove screws@). Remove the oil filter cover with the O
ring.
(D
-
Pull oil filter
out of the oil filter housing.
I Lock ring plier (51012011000)
-
Completely drain the engine oil.
-
Thoroughly clean the parts and sealing surface.
M20x1.5
15 Nm (11.1 lbf ft)
(D
with the O-ring.
M20x1.5
15 Nm (11 .1 lbf ft)
O
with the magnet and
M12x1.5
20 Nm (14.8 lbf ft)
(�
p. 313)
Advertisement
Table of Contents
