Table of Contents
Advertisement
9.26
Installing the s
9 SHOCK ABSORBER, SWINGARM
Info
Watch the pressure regulator dial.
Ensure that the damper is filled to the specified pres
sure.
-
Screw the filling port shut with tap handle f).
-
Close spigot G) and take the damper out of the special tool.
-
Tighten the filling port screw.
Guideline
Screw, reservoir fill-
ing port
-
Ensure that adjusting ring
diate washer.
-
Measure the overall spring length while the spring is not
under tension.
-
Position spring.
Guideline
Spring rate
Weight of rider: 65 ...
75 kg (143 ... 165 lb.)
Weight of rider: 75 ...
85 kg (165 ... 187 lb.}
Weight of rider: 85 ...
95 kg (187 ... 209 lb.}
-
Mount intermediate washer
C,.
-
Mount ring
Alternative 1
-
Tension the spring to the prescribed amount by turning
the adjusting ring.
Guideline
I Spring preload
I Hook wrench (T106S)
M5
3 Nm (2.2 lbf ft}
O
is screwed on with the interme
54 N/mm (308 lb/in)
57 N/mm (325 lb/in)
60 N/mm (343 lb/in)
8
8.
and spring retainer
110 mm (0.39 in)
(a
p. 321)
73
Advertisement
Table of Contents
