Table of Contents
Advertisement
12 FUEL TANK, SEAT, TRIM
A
Warning
-
-
94
Fuel is poisonous and a health hazard.
Danger of poisoning
Avoid skin, eye and clothing contact with fuel.
Immediately consult a doctor if you swallow fuel.
Do not inhale fuel vapors.
In case of skin contact, rinse the affected area with plenty of water.
Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.
Change your clothing in case of fuel spills on them.
Main work
-
Check the routing of the throttle cable.
Position the fuel tank and fit the two spoilers to the sides of
the radiator bracket.
Make sure that no cables or throttle cables are trapped or
damaged.
-
Attach the hose to the fuel tank breather on the tank lid.
Mount and tighten screw
Guideline
Remaining screws,
chassis
Position the collar bushings and horn, and mount and tighten
screws@.
Guideline
Remaining screws,
chassis
-
Connect the connector of the horn.
fs)
Plug in connector
for the fuel pump.
Remove the wash cap set.
-
Thoroughly clean the plug-in connection of the fuel line using
compressed air.
•
Info
I
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
Lubricate the 0-ring and connect plug-in connection
the fuel line.
Info
Route the cable and fuel line at a safe distance from
the exhaust system.
Finishing work
Mount the seat.
(a
p. 91)
(!!.!
p. 44)
O
with the rubber bushing.
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
C,
for
..
Advertisement
Table of Contents
