17
ENGINE
17.3.16
Removing the ignition pulse generator
17.3.17
Removing the suction pump
17 .3.18
Removing the water pump cover
O.
Remove screws
Pull the cable sleeve out of the engine case.
Take off the crankshaft position sensor.
O.
Remove screws
8
Take off oil pump cover
of the suction pump.
Remove external rotor @ and internal rotor
0.
Take off pin
(D
Remove pin
upward.
@.
Remove O-ring
O.
Remove screws
Take off the water pump cover.
Take off the water pump cover seal.
C,.
137