Checking The Heim Joint For Play; Changing The Heim Joint - Husqvarna FS 450 2019 Repair Manual

9.32
Checking the heim joint for Ria�
9.33

Changing the heim joint

SHOCK ABSORBER, LINK FORK 9
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Place a load on the front of the vehicle.
✓ The rear wheel is not in contact with the ground.
Main work
-
Move the link fork up and down.
If there is detectable play:
-
Change the heim joint.
T01328-10
Finishing work
-
Remove the load from the front of the vehicle.
-
Remove the motorcycle from the lift stand.
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Remove the shock absorber.
Main work
-
Clamp the shock absorber into the vise.
Guideline
I
Use soft jaws.
-
Remove both collar bushings
cial tool.
I
Drift (T120) (ra:!l
-
Press the heim joint against a lock ring using the special tool.
I
Pressing tool (T1207S)
Remove second lock ring
(ra:!l p. 12)
(0 p. 89)
(ra:!l
(0 p. 12)
(0 p. 59)
O
of the heim joint with a spe­
p. 322)
(ra:!l p. 323)
8.
..
p. 12)
89