C,.
Mount spring
Position the positive cable on the starter motor.
Mount and tighten the nut.
Guideline
Nut, cable on starter
M6
motor
0.
Position protection cap
Position the throttle valve body.
Tighten hose clip (D.
Position the shift lever.
Mount and tighten screw @ with washers.
Guideline
Screw, shift
M6
lever
Slide on the engine sprocket with the collar facing the engine.
fD
Mount screw
with the washer but do not tighten yet.
Guideline
Screw, engine
M10
sprocket
ENGINE 17
4 Nm (3 lbf ft)
14 Nm (10.3 lbf ft)
®
Loctite
243
™
60 Nm (44.3 lbf ft)
Loctite
®
2701
TM
165