Table of Contents
Advertisement
16 BRAKE SYSTEM
Warning
-
Warning
-
150
Checkin the brake linin s of the rear brake
Worn-out brake linings reduce the braking effect.
Danger of accidents
Ensure that worn-out brake linings are replaced immediately.
Changing the rear brake linings
Incorrect servicing will cause the brake system to fail.
Danger of accidents
Ensure that service work and repairs are performed professionally.
•
Info
I
Overfilling the brake fluid reservoir is prevented.
-
Tighten the bleeder screw. Remove the bleeder bottle hose.
Attach the protection cap.
-
Disconnect the bleeding device. Remove the bleeder cover.
-
Fill brake fluid up to the MAX marking.
I Brake fluid DOT 4 / DOT 5.1
-
Position the cover with the membrane. Mount and tighten the
screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
-
Check the hand brake lever for a firm pressure point.
-
Check the brake linings for minimum thickness f).
I Minimum thickness f)
If the minimum thickness is less than specified:
-
Change the rear brake linings.
-
Check the brake linings for damage and cracking.
If damage or wear is encountered:
-
Change the rear brake linings.
(ll!:!I
p. 304)
I � 1 mm (� 0.04 in)
(ll!:!I
p. 150)
(ll!:!I
p. 150)
Advertisement
Table of Contents
