Installing The Clutch Cover - Husqvarna FS 450 2019 Repair Manual

•
17.5.17

Installing the clutch cover

t
8.
Mount clutch throw-out
Position the clutch pressure cap.
O
✓ The sleeves are aligned with the center of the pres­
sure cap openings.
Info
Incorrect positioning of the clutch pressure cap may
cause the clutch to slip.
Align the holes of the clutch pressure cap with the spring
washer and the pretension ring.
8
Mount screws and tighten in a crisscross pattern.
Guideline
Screw, clutch pres­ M5
sure cap
Position the balancer shaft with special tool
I
Locking screw (78129032000)
f)
✓ Marking and the special tool are aligned.
8
Mount dowels and position the clutch cover gasket
ENGINE 17
8 Nm (5.9 lbf ft}
O .
(� p. 317)
8.
233
...