Checking The Clutch - Husqvarna FS 450 2019 Repair Manual

17 ENGINE
17.4.38
Check clutch throw-out
Place the clutch push rod
Check the contact surface of clutch pressure cap
Check outer pretension ring
Check outer spring washer
Check inner pretension ring
Check inner spring washer @ for damage and wear.
Check release ring
Check sleeves
Check clutch center Gi) for damage and wear.
214

Checking the clutch

O
for damage and wear.
If there is damage or wear:
-
Change the clutch push rod.
f9
on a flat surface and check for run-out.
If there is run-out:
-
Change the clutch push rod.
If there is damage or wear:
-
Change the clutch pressure cap.
C,
If there is damage or wear:
-
Change outer pretension ring.
0
for damage and wear.
If there is damage or wear:
-
Change outer spring washer.
(D
If there is damage or wear:
-
Change inner pretension ring.
If there is damage or wear:
-
Change inner spring washer.
@)
for damage and wear.
If there is damage or wear:
-
Change release ring.
@)
for damage and wear.
If there is damage or wear:
-
Change the sleeves.
8
for damage and wear.
for damage and wear.
for damage and wear.
D04619-10