Table of Contents
Advertisement
-
Check stop disks @ for damage and wear.
If there is damage or wear:
-
Change the stop disks.
CD
-
Use new lock rings
in every repair.
-
Check distance sleeve� for damage and wear.
If there is damage or wear:
-
Change distance sleeve.
17.4.44 Assembling the main shaft
Info
Use new lock rings with every repair.
Preparatory work
-
Lubricate all parts carefully before assembling.
-
Check the transmission.
Main work
-
Secure the main shaft in the vise with the gear teeth facing downward.
Guideline
I Use soft jaws.
O,
-
Mount needle bearing
(D
-
Mount stop disk
and lock ring
-
Mount third/fourth-gear sliding gear
-
Mount lock ring (D.
-
Mount distance sleeve@.
-
Mount second-gear fixed gear
-
Finally, check all the gear wheels for smooth operation.
(0
p. 219)
and mount fifth-gear idler gear
C,.
0
with the small gear wheel facing downward.
CD
with the collar facing downward and mount stop disk
D04977-11
8
with the shift dogs facing up.
ENGINE 17
..
@).
..
221
Advertisement
Table of Contents
