Table of Contents
Advertisement
SHOCK ABSORBER, LINK FORK 9
-
Position link fork and mount fork pivot.
Info
Pay attention to flat area
8 .
-
Mount and tighten nut
Guideline
I
Nut, fork pivot
I M16x1 .5
-
Mount the chain.
-
Connect the chain with connecting link
Guideline
The closed side of the chain joint lock must face in the
direction of travel.
-
Position the foot brake cylinder.
8
✓ Push rod
engages in the foot brake cylinder.
•
Info
I
Ensure that the dust boot is correctly seated.
-
Mount and tighten screws
Guideline
Remaining screws,
chassis
-
Position the angle lever and linkage lever.
-
Mount and tighten fitting (D.
Guideline
Nut, linkage lever on
angle lever
•
Info
I
Pay attention to flat area
-
Mount and tighten screw @.
Guideline
Screw, bottom
M 1 0
shock absorber
•
Info
I
Raise the wheel slightly to be able to mount the screw
more easily.
O .
I 100 Nm (73.8 lbf ft) I
@).
0 .
M6
10 Nm (7.4 lbf ft)
M14x1 .5
60 Nm (44.3 lbf ft)
0.
60 Nm (44.3 lbf ft)
®
Loctite
2701
TM
61
Advertisement
Table of Contents
