Table of Contents
Advertisement
15 WIRING HARNESS, BATTERY
Warning
-
-
-
-
-
-
138
Installing the 12 V batte�
H02650-10
Char in the 12 V battery
12 V batteries contain harmful substances.
Risk of injury
Keep 12 V batteries out of the reach of children.
Keep sparks and open flames away from 12 V batteries.
Only charge 12 V batteries in well-ventilated rooms.
Maintain a minimum clearance from inflammable materials when charging 12 V batteries.
Minimum clearance
Do not charge deeply discharged 12 V batteries if the charge is already below the minimum voltage.
Minimum voltage before the start of the charge
Dispose of 12 V batteries with less than the minimum voltage correctly.
Main work
-
Position the 12 V battery in the battery compartment with
the terminals facing forward, and secure with holding
O.
bracket
112 V battery (HJTZ5S-FP-C)
-
Mount and tighten screw
Guideline
Info
f)
Contact disks
and cable sockets
tery terminal.
0
-
Connect positive cable
Guideline
Screw, battery termi-
nal
-
Slide positive terminal cover
-
Connect negative cable @ to the 12 V battery.
Guideline
Screw, battery termi-
nal
-
Position the voltage regulator.
Finishing work
-
Mount the seat.
(8
p. 1 00)
-
Install the air filter box cover.
1 m (3 ft)
9 V
(8
p. 286)
8.
M6
10 Nm (7.4 lbf ft)
must be mounted under screws
C,
with the claws toward the bat
to the 12 V battery.
M5
2.5 Nm (1.84 lbf ft)
Cs}
over the positive terminal.
M5
2.5 Nm (1.84 lbf ft)
(8
p. 95)
fD
Advertisement
Table of Contents
